The Cellocator CR300B is Cellocator’s entry-level unit for fleet...
The CelloTrack product line is designed for advanced asset tracking and...
Cello-IQ is a driver behavior monitoring and eco-driving device,...
The Cello-CANiQ is a fleet management solution, utilizing a smart...
Adaptive Modules offer a range of accessories for our M2M products. A selection of antennas, power supplies, cables, din rail mounts and connectors for our GSM, GPRS, GPS, 3G, Wi-Fi, CDMA and PSTN network modems and routers can be ordered online, including:
Select range of Wi-Fi, GPS, 4G, quad and Bluetooth wireless antennas for internal/external applications as well as fixed or mobile GPS applications.
We offer a selection of cables with connection variations such as; MMXC and SMA for your M2M requirements.
Available for our wide range of wireless boxed products, including cellular routers, modems and industrial Wi-Fi products.
Ensure your install sites meet your devices' requirements with our wireless signal strength testers.
Adaptive Modules is a designer and supplier of innovative multiband antenna solutions. Our antennas are designed for telematics, telemetry and monitoring applications using both licensed and unlicensed frequencies.
Our product portfolio includes surface-mount, internal and external antennas designed to fit a range of handheld, portable and mobile device designs as well antenna solutions for internal and external use. Our products are deployed in applications using GSM/UTMS, 4G/LTE, GPS, Satelite, Glonass, RF, ISM, WLAN, Tetra and Bluetooth technologies.
With variations in form factor, cable length and connector types available our partners can also offer:
While we have a selection of our antenna range on display below we can also accommodate your custom requirements. If you would like to find out more about your options email us at firstname.lastname@example.org or call on 0044 (0) 1273 248977
Position GSM and GPRs aerial systems; find the best location for your radio products. Our GSM/GPRS Signal Strength meter can be used to detect and measure surrounding GSM and GPRS base stations.
Measures and displays all available GSM and GPRs networks. The tester can also be “locked” to one network by inserting the providers SIM card.
GPRS is a protocol that sits on the GSM network. The GSM/GPRS Signal Strength tester can find out whether GPRS is available over the Vodafone network. If you wish to test GPRS you would require a Vodafone GPRS enabled SIM card in the meter – please view our available SIM providers.
To ensure your new application deployments are making the most of the 4G / LTE cellular networks our 4G signal strength testers allow you to perform full network analysis. This data helps you to choose an optimal location so you can deploy your devices in the optimal position, ensuring you can guarantee maximum cellular uptime.
The testing unit will switch off automatically after a preset time if left on and unused. It is also contained within an armored rubber protective sleeve.
Many of our units offer the ability add additional sources, allowing you to use the device remotely. We have a selection of power options for these, as well as additional and overseas power supplies for a wide range of wireless products.
For more information on power options email us on email@example.com or call on 0044 (0) 1273 248977
The ACC-CA42 is a USB Type-A(M) to mini-USB Type-B(M) cable. Length: 1500mm for the Maestro M1003G series cellular modems.
The CS23x9 is a series of radio signal analysers for use with 2G (CS2369) only or 4G (LTE), 3G and GSM (CS2389) radio networks. The tester measures and displays radio signal strength received on each network found allowing you to perform comprehensive site surveys.
Parani-PAT: Patch antenna for Parani-SD and Parani-MSP products. RP-SMA-R/A Right-Hand Thread 9dbi. Users can extend wireless link distance up to 1,000 meters via Parani with Patch Antennas on both sides.