Serial Bluetooth Modules -Audio Modules - Bluetooth Device Servers - Bluetooth Marketing and many more......
Bluetooth is a wireless protocol for exchanging data over short distances from fixed and mobile devices, creating personal area networks (PANs). It can connect several devices, overcoming problems of synchronization.
We have Class 1 and Class 2 Bluetooth devices giving you a variation in transmission ranges and form factors.
Now with Bluetooth Low Energy modules from KC Wirefree available, supporting Apple iBeacon, most Bluetooth standard GATT profiles, and CSRmesh Networking. Additionally, they include an easy to use AT Command set for configuration and operational control of the low energy modules.
Our Bluetooth Data Modules are fully embedded wireless serial port systems. Complete with on-board flash memory KC Wirefree Bluetooth Data Modules are capable of deploying any Bluetooth or customized data profile required for your application, with firmware which can be updated whenever required. KC Wirefree data modules are pre-licensed off-the-shelf solutions allowing for quick turn around and a fast time to market.
Embedded Bluetooth modules are designed to be integrated into your custom board or equipment. The modules enable wireless Bluetooth connectivity to your products.
The modules can be designed with your products and integrated onto your board design to enable wireless Bluetooth connectivity.
Bluetooth 4.0 is a low energy solution for short range data transfer. The low power consumption of these modules make them ideal for portable, battery powered devices. The new protocol also includes Mesh networking ability, allowing devices to connect to eachother, passing commands from a controller to all connected nodes, opening the door for home automation implementations such as mobile phone controlled lighting.
Bluetooth Low Energy modules support Apple iBeacon, most Bluetooth standard GATT profiles, and CSRmesh Networking. Additionally, we are creating an easy to use AT Command set for configuration and operational control of the low energy modules.
If you are looking to trial and experiment with different Bluetooth devices before launching a new project our development kits give you the ideal platform. Use the development kits to set up custom configurations and try different firmware editions, including Bluetooth Serial Port Profile (SPP), A2DP, Audio Gateway, Audio headset and Dial-Up Networking Profile (DUN) amongst many more.
The WE310F5 combination Wi-Fi and Bluetooth Low Energy (BLE5) module provides a low-cost and high-speed solution for IoT device manufacturers to add wireless connectivity to their applications.
The WL865E4-P is a fully integrated dual band, dual mode, combo Wi-Fi (802.11 a/b/g/n) / Bluetooth Low Energy (BLE) 5.0 module, that provides an easy, cost-effective way for manufacturers to add wireless connectivity to their products. The module is based on an integrated tri-core system-on-chip, with dedicated CPU’s for IoT application, Wi-Fi and BLE.
The WE866C3-P is a low power, dual-band Wi-Fi and Bluetooth (BT/BLE5) module with an extremely small footprint that provides an easy & cost-effective way for manufacturers to add wireless connectivity to their products. With the integrated LTE-WiFi/BLE coexistence filter, the product offers a powerful cellular backhaul with Telit's LE910Cx 4G LTE...
RE866 interface board for EVK2 allows for testing the functionalities and performance of Telit's RE866 BLE+ LoRa combo module.
Bluetooth 4.2 qualified single mode module with embedded MEMS sensors.
The BlueMod+S42 is a Bluetooth 4.2 Smart Module based on the nRF52 Nordic Chip from Telit, designed for smartphone connectivity and cable replacement applications with low energy consumption.
Embedded Bluetooth Smart Ready 4.0 module with support for NFC handover from Telit, designed to connect ultra low power wireless sensors and peripherals.
BlueMod+S is a Bluetooth solution for smartphone connectivity and cable replacement applications with low energy consumption.
The HF-BL100-C is a Bluetooth Low Energy module offering high performance for IoT applications.
The Parani-BCD110 is a Bluetooth Class1 OEM SMD/DIP module combining antenna for OEM manufactures who want to implement Bluetooth Class1 functionality with their products cost effectively and also in timely manner. If you would like more information or volume pricing please contact us
The Parani-BCD100-G01 is a Bluetooth Class 1 OEM module for OEM manufacturers who want to implement Bluetooth Class 1 functionality with their products cost effectively and also in timely manner. If you would like more information or volume pricing please contact us
The ESD110B-DU is a class 1 type Embedded Bluetooth Serial Module designed for users who wish to embed Bluetooth connectivity directly onto the circuit boards of RS232 based equipment like security systems, POS, industrial machinery, and medical devices.