Looking to add wireless connectivity to your device without needing a major redevelopment? Well, our ready boxed wireless solutions to add remote connectivity to your applications.
With solutions ranging from cellular routers, GSM modems, Bluetooth devices, long-range RF modems, industrial Wi-Fi solutions or even fully embedded tracking solutions, we have the perfect solution for your wireless networking challenge. Our portfolio includes multiple ranges, connector options and form-factors, including ruggedized devices for installation in the harshest of industrial environments.
Our boxed M2M solutions also allow you to benefit from:
Cellular GSM routers provide you with the ability to remotely communicate with devices and establish internet connectivity to a wide range of applications. Our industrial GSM routers are built to offer reliability and high performance even when under the most challenging and extreme environments.
Customers with traffic applications such as UTC, ANPR and CCTV have taken advantage our cellular routing products to achieve massive cost-savings over traditional backhaul methods such as ADSL, fiber or leased lines. Other key users are in digital signage for remote media transfer, building management systems for remote maintenance and general telemetry applications.
Ethernet and serial ports allow for multiple devices to be connected and controlled, while built-in Open VPN, IPSEC, PPTP and L2TP offers extra device and data transfer security to keep your information safe.
Our cellular routers provide you with consistent and secure operability and reliable wireless connections for your most critical remote applications.
Ideal for applications in:
Benefit from M2M connectivity by remotely accessing your serial devices through a cellular modem. Cellular modems have become an idea cable replacement option, giving you no limit to how far away from your terminal/workstation the device can be positioned, as well as dramatically speeding up installation times.
Allowing you to send data over the GSM cellular network GSM modems have become widely used to enable M2M (Machine to Machine) remote communication functionality in a rapidly growing list of applications and industries, including in vending machines, automated meter reading units and a wide range of monitoring/telemetry devices.
With GPRS and 3G modems available you are able to select a device which can readily match your required data loads to be sent over the mobile network.
By adding a GSM modem to your application you open up the possibility of adding data logging, TCP/IP, E-mail, FTP and standalone automated modes of operation, giving you a wide range of possibilities for remote communication.
To cater for the increase of wireless devices requiring access to data, services and the internet, we have a range of industrial Wi-Fi access points, hotspots and controllers from NEXCOM. NEXCOM Wi-Fi Hotspots offer full turnkey solution including access management, providing flexible management rules for owners. They can be used to offer multiple fares, guest policies, and fast roaming across different areas with an identical controller.
Their rugged build quality allows users to provide high numbers of wireless connections in the harshest of conditions, from factories, busy public spaces (such as shops, convention centers and airports), transport (including buses and rail) and outdoor areas such as parks and squares. Options with added security are available for sensitive and confidential data, keeping your data safe, preventing interception and decryption, while still allowing companies to run a BYOD (Bring Your Own Device) working policy.
Other options include wireless point-to-point links, allowing you to set up links between sites up to 5KM away.
Adaptive Modules can offer a full range of external Bluetooth devices. Our partners' ranges including USB and Serial connector adapters, allowing you to retrofit Bluetooth connectivity to devices already in the field.
Our dual-mode USB dongles offer both Standard and Low Energy Bluetooth 4.0 wireless access, being comprised of high quality CSR Bluecore 8510 ROM chipsets. The Bluetooth dongles require Bluetooth stack software to be installed on your host computer in order to implement all available Bluetooth profiles. KC Wirefree’s USB Bluetooth Dongles include additional settings, allowing you to provide a custom Bluetooth device name as well as other features. This Bluetooth USB dongle does NOT use kcSerial Bluetooth stack.
Our High Power Bluetooth Serial adapter uses kcSerial embedded Bluetooth stack, giving you a fully embedded Bluetooth Serial Port Profile adapter. This means that your host machine doesn’t require an active Bluetooth stack, with consistent operation across any Operating System.
With a built in Silicon Labs CP2102 USB-UART bridge chip, you have access to Microsoft certified device drivers, allowing for quick and easy installation upon insertion. These drivers allow you to set up a virtual COM port via USB cable to access the KC-4132 module UART interface, making it ideal for wireless replacement for cable.
Our Radio Modem options come with 4 different connection ports; USB, RS-232/485, Ethernet and Telephone. The radio modem supports 7 frequency hopping channels, each with 65K available addresses peer-to-peer (no master/slave dependencies), point-to-point, point-to-multipoint and multi-drop network topologies.
No configuration is necessary for out of box RF operations. Data is transmitted through the radio modems on a wireless link.
The Telit LT70-868 terminal operates in 863-870 MHz band with 500mW Output power and with ultra-low power standby mode, efficient wake up on radio and budget link of 144 dB. With a power supply range of 6-40 V, supporting RS232/RS485/RS422 serial interfaces.
Our radio modems are available to buy online or alternatively, you are able to discuss your requirements by calling our sales office on +44 (0) 1273 248 977.
Fully compliant with IEEE802.3at/af PoE standard, industrial PoE series provide comprehensive PoE solution with durability and reliability. All kinds of needs can be satisfied with our complete lineup, including unmanaged, managed, fiber uplink, SFP, combo, modular model, PoE mode A and PoE mode B.
Our industrial networking devices are rugged for heavy industrial use, with lines including rail approval.
As well as industrial Ethernet switches we also have ranges of:
Telemetry and location data is vital for fleets of vehicles to allow for effective management of resources. With data required to be up to date for accurate measurements and results constant or easily accessible data connection is needed.
This is where cellular networks are advantageous; allowing users to monitor, manage and interact with your device from anywhere, which when combined with GPS allows you to get and send on location information from your unit on the road to your HQ.
Such implementations of using these tracking terminals are common in:
The Parani-SD1000U is a class 1 type Bluetooth USB adapter for Serial Port Replacement that supports 300 meters of wireless transmission distance by default. If you would like more information or volume pricing please contact us
The GT-HE910-EUG is a complete Cellular Terminal solution for GSM/UMTS GPS applications. Incorporating Telits HE910-EUG module, the terminal is capable of handling all GSM/ UMTS GPS processing with PYTHON script. If you would like more information or volume pricing please contact us
The Parani-SD1100 is a Class1 type of Bluetooth Serial Adapter that supports 100 meters of wireless transmit distance by default. If you would like more information or volume pricing please contact us
The M110 series modems are designed to provide connectivity across a broad range of applications. Allowing Internet connectivity via serial port to various devices, they help transporting data from any industrial device to data control servers, allowing businesses to benefit from real-time monitoring, management and control.
Integrating 4/3G connectivity and advanced security, the InRouter615-S series of routers is the next generation of InRouter cellular routers. With embedded hardware watchdog, link detection, auto-recovery, Wi-Fi and auto-reboot, the InRouter615-S series provides reliable communications to unattended sites.
Integrating 3G, 4G LTE and advanced security, the InRouter611-S series is the next generation of InRouter cellular routers. With embedded hardware watchdog, link detection, auto-recovery and auto-reboot, the InRouter611-S series provides reliable communications to unattended sites. If you would like more information or volume pricing please contact us
Integrating 3G connectivity and advanced security, the InRouter611-S series is the next generation of InRouter cellular routers. With embedded hardware watchdog, link detection, auto-recovery, Wi-Fi and auto-reboot, the InRouter611-S series provides reliable communications to unattended sites. If you would like more information or volume pricing please...