Viewed products

Recently Viewed

IWF5210 Outdoor Wi-Fi Access Point & Repeater


New product

The IWF 5210 is a single radio Wi-Fi 802.11a/b/g/n outdoor device with versatile functions which includes AP, Repeater, and CPE mode in rugged IP68- rated metal weatherproof housing.

If you would like more information or volume pricing please contact us

If you would like more information or volume pricing please contact us

More details

More info

IWF5210 Outdoor Wi-Fi Access Point & Repeater Datasheet

The IWF 5210 is a single radio Wi-Fi 802.11a/b/g/n outdoor device with versatile functions which includes AP, Repeater, and CPE mode. Its rugged IP68- rated metal housing is weatherproof, pressure balancing, water-tight and rust-resistant, making it an ideal solution for deployments in harsh conditions, such as outdoor or industrial environments.

When configured in AP mode, IWF 5210 operates as an AP station with wall-penetrating high-power signal and long-range coverage to serve Wi-Fi clients. Furthermore, IWF 5210 with multiple SSIDs is capable of acting as multiple Virtual APs (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network using VLANs to protect critical resource. In addition, the AP can be set up as a Mesh node by establishing multiple WDS links to bridge neighbor access points together. When operating in CPE (Client) mode, it provides the host device the Wi-Fi connection with roaming capability. CPE mode can also serve as Wi-Fi modem to receive wireless signal over the last-mile internet feed from WISPs. IWF 5210 can be configure to Repeater Mode allows it to help extend the range of your wireless network.

Key Features:

  • IEEE802.11 a/b/g/n for transmission rate up to 300Mbp
  • Multiple operating modeAP/ Repeater/ CPE mode
  • IP68 rated metal housing with -25 to +70°C operating temperature
  • Gigabit Ethernet with uplink port powered with standard IEEE 802.3af PoE
  • Venting window with Teflon membrane for balancing air pressure Comprehensive security encryption with WEP, WPA/WPA2, IEEE 802.1X or PSK
  • Layer-2 Wireless Firewall gives protection from wireless attacks
  • Multiple Virtual APs for grouping policy management
  • Tunnel-based AP management by backend AP controller


Wireless Radio

  • Wireless interface: IEEE a/b/g/n selectable dual band radio operating in 2.4GHz or 5GHz frequencies
  • Wireless architecture:
    • (1) AP mode
    • (2) WDS mode
    • Repeater mode
    • CPE mode
  • Modulation:
    • (1) OFDM (64-QAM, 16-QAM, QPSK, BPSK)
    • (2) DSSS (CCK, DBPSK, DQPSK)
  • Channels:
    • (1) USA: 1~11, 36, 40, 44, 48, 52~64, 100~136, 149~165
    • (2) Europe: 1~13, 36, 40, 44, 48, 52~64, 100~140
    • (3) Japan: 1~13, 36, 40, 44, 48, 52~64, 100~140
  • Data rate with auto fallback:
    • (1) 802.11a: 6 ~ 54 Mbps
    • (2) 802.11b: 1 ~ 11 Mbps
    • (3) 802.11g: 6 ~ 54 Mbps
    • (4) 802.11n: 6.5 ~ 300Mbps
  • Transmit Power (with one stream):
    • (1) 802.11a: 16dBm@54Mbps ±2dB
    • (2) 802.11b: 25dBm@11Mbps ±2dB
    • (3) 802.11g: 22dBm@54Mbps ±2dB
    • (4) 802.11n 5G HT20 & HT40: 15dBm@MCS7 ±2dB
    • (5) 802.11n 2.4G HT20 & HT40: 21dBm@MCS7 ±2dB
  • Receiver Sensitivity:
    • (1) 802.11a: -89dBm@54Mbps ±2dB
    • (2) 802.11b: -93dBm@11Mbps ±2dB
    • (3) 802.11g: -91dBm@54Mbps ±2dB
    • (4) 802.11n 5G HT20: -83dBm@MCS0 ~ -65dBm@MCS7
    • (5) 802.11n 5G HT40: -80dBm@MCS0 ~ -62dBm@MCS7
    • (6) 802.11n 2.4G HT20: -85dBm@MCS0 ~ -67dBm@MCS7
    • (7) 802.11n 2.4G HT40: -82dBm@MCS0 ~ -62dBm@MCS7

Multiple Operating Modes

  • AP mode
  • WDS mode (WDS bridge): support up to 4 WDS links
  • Repeater mode: Acting as AP and STA client simultaneously
  • CPE mode (Clint gateway)

Gateway Features in CPE Mode

  • IP sharing on the LAN side for multiple users (subscribers) to get access to the Internet by built-in NAT mode
  • Built-in DHCP server for issuing local IP address
  • Built-in DDNS/DNS client
  • Uplink and downlink bandwidth management
  • IP/Port forwarding and DMZ

Access Point Features

  • Number of ESSIDs (Virtual APs): 8
  • Number of associated clients: 128
  • Setting for maximum number of associated clients
  • Adjustable beacon interval
  • Auto fallback data rate
  • Support IAPP
  • RTS/CTS and fragmentation control
  • ACK timeout support
  • Adjustable transmission power: 5 steps, 2dbm per step
  • Wireless site survey: scanning the surrounding Wi-Fi signals
  • Support IEEE 802.11e WMM and QoS


IWF5210 Outdoor Wi-Fi AP DS

IWF5210 Outdoor Wi-Fi AP Datasheet

Download (1.17M)