Position GSM and GPRs aerial systems; find the best location for your radio products. Our GSM/GPRS Signal Strength meter can be used to detect and measure surrounding GSM and GPRS base stations.
Measures and displays all available GSM and GPRs networks. The tester can also be “locked” to one network by inserting the providers SIM card.
GPRS is a protocol that sits on the GSM network. The GSM/GPRS Signal Strength tester can find out whether GPRS is available over the Vodafone network. If you wish to test GPRS you would require a Vodafone GPRS enabled SIM card in the meter – please view our available SIM providers.
To ensure your new application deployments are making the most of the 4G / LTE cellular networks our 4G signal strength testers allow you to perform full network analysis. This data helps you to choose an optimal location so you can deploy your devices in the optimal position, ensuring you can guarantee maximum cellular uptime.
The testing unit will switch off automatically after a preset time if left on and unused. It is also contained within an armored rubber protective sleeve.
Ensure your devices aren't installed in cellular blackspots by performing GPRS cellular signal audits with our 2G signal strength testers.
Don't install your application blindly; ensure you choose the cellular network with the best coverage in your area with a 3G signal strength tester.
Perform 4G/LTE coverage analysis so you know which networks perform best in your area, so you don't install your remote device in a cellular blackspot.
The CS23x9 is a series of radio signal analysers for use with 2G (CS2369) only or 4G (LTE), 3G and GSM (CS2389) radio networks. The tester measures and displays radio signal strength received on each network found allowing you to perform comprehensive site surveys.