Viewed products

Recently Viewed

Sale! HF-LPC100 Low Power Wi-Fi/Bluetooth Module View larger

HF-LPC100 Low Power Wi-Fi/Bluetooth Module


New product

The HF-LPB100 is a low power Wi-Fi and Bluetooth combined module, allowing devices to easily access wireless networks.

If you would like more information or volume pricing please contact us

If you would like more information or volume pricing please contact us

More details

More info

HF-LPC100 Wi-Fi & Bluetooth Module User Manual

HF-LPC100 Low Power Wi-Fi & Bluetooth Module

The HF-LPC100 is a fully self-contained small form-factor 802.11b/g Wi-Fi and Bluetooth combined module, which provides a wireless interface to any equipment with a UART interface for data transfer. The HF-LPC100 integrates MAC, baseband processing, an RF transceiver (including hardware power amplifier), Wi-Fi/Bluetooth protocols and network TCP/IP stack in it's embedded firmware.

The HF-LPC100 employs the world's lowest power consumption embedded architecture. It has been optimised for all kinds of client applications in home automation, smart grid, handheld device, personal medical applications and industrial control.

  • Support 802.11b/g wireless standard, STA mode
  • Support Audio Input(MIC) and Audio Output(Speaker) Interface, High Quality to Collect and Play Audio
  • Support Half-Duplex Audio Communication Without Delay
  • Support Audio ADPCM Compression Algorithm, Small Size For Application
  • Support BlueTooth 2.1+EDR Standard
  • Support Bluetooth SmartLink
  • Cost Effective Solution With High-Flying MCU
  • Support UART/GPIO Data Communication Interface
  • Support Wireless/Remote Firmware Upgrade
  • Provide SDK for application develop
  • Support Internal/External Antenna Option
  • Smallest Size: 23.1mm x 32.8mm x (3.45±0.3)mm
  • Wide input voltage: 3.3 V ~ 4.2 V
  • FCC/CE Certificated

Additional Features

Wireless Parameters

  • Certification: FCC/CE
  • Wireless standard: 802.11 b/g,802.15.2
  • Frequency range: 2.412GHz-2.484GHz
  • Transmit Power:
    • 802.11b: +16 +/-2dBm (@11Mbps)
    • 802.11g: +14 +/-2dBm (@54Mbps)
  • Receiver Sensitivity:
    • 802.11b: -93 dBm (@11Mbps ,CCK)
    • 802.11g: -85dBm (@54Mbps, OFDM)
  • Antenna Option:
    • External: I-PEX Connector
    • Internal:On-board PCB antenna

Hardware Parameters

  • Data Interface:
    • UART
    • USB, PWM, GPIO
  • Operating Voltage: 3.1~4.2V
  • Operating Current:
    • Peak [Continuous TX]: ~220mA
    • Normal Average. ~30mA, Peak: 220mA
  • Operating Temperature: -25℃- 85℃
  • Storage Temperature: -45℃- 125℃
  • Dimensions and Size: 23.1mm×32.8mm×2.7mm

Software Parameters

  • Network Type: STA, BT2.1
  • Security Mechanisms: WEP/WPA-PSK/WPA2-PSK
  • Encryption: WEP64/WEP128/TKIP/AES
  • Update Firmware: Local Wireless (OTA), Remote
  • Network Protocol: IPv4, TCP/UDP/FTP/HTTP
  • User Configuration:
    • AT + instruction set
    • Android/iOS
    • Smart Link APP tools