HF-LPT100 Low Powered Tiny Wi-Fi Module

HF-LPT100 Tiny Wi-Fi Module User Manual

HF-LPT100 & HF-LPT100S Tiny Wi-Fi Modules Differences

HF-LPT100 Low Power Tiny Wi-Fi Module

The HF-LPT100 is a fully self-contained small form-factor 802.11b/g/n Wi-Fi module, providing a wireless interface to any equipment with a serial/PWM interface for data transfer. The HF-LPT100 integrates MAC, baseband processing, an RF transceiver (including hardware power amplifier), Wi-Fi protocol and network TCP/IP stack in it's embedded firmware.

The HF-LPT100 employs the world's lowest power consumption embedded architecture. It has been optimised for all kinds of client applications in home automation, smart grid, handheld device, personal medical applications and industrial control.

• Support IEEE802.11b/g/n Wireless Standards
• Highly Cost Effective With High-Flying MCU: MC101
• Low-Power Applications with Excellent Power Save Scheme
• Support UART/PWM/GPIO Data Communication Interface
• Support Work As STA/AP/AP+STA Mode
• Support Smart Link Function (APP provide)
• Support Wireless and Remote Firmware Upgrade Function
• Support WPS Function
• Support Multi-TCP Link (Upto 5) Connection
• Support Software Controlled Power Key
• Support Internal/External Antenna Option
• Single +3.3V Power Supply
• Smallest Size: 22mm x 13.5mm x6mm, 1x10mm 2mm DIP Package

There is also another variant of this module called the HF-LPT100S Which offers an internal copper line antenna and antenna pad for external antenna connections. This module also supports a maximum 4 channel PWM output compared to the LPT100's 3 channels. If you would prefer this variant of the module please select it from the drop down box above.

Additional Features

Wireless Parameters

• Certification: FCC/CE
• Wireless standard: 802.11 b/g/n
• Frequency range: 2.412GHz-2.484GHz
• Transmit Power:
  • 802.11b: +16 (@11Mbps)
  • 802.11g: +14 (@54Mbps)
  • 802.11n: +13 dBm (@HT20, MCS7)
• Receiver Sensitivity:
  • 802.11b: -93 dBm (@11Mbps ,CCK)
  • 802.11g: -85dBm (@54Mbps, OFDM)
  • 802.11n: -82 dBm (@HT20, MCS7)
• Antenna Option: External- I-PEX Connector

Hardware Parameters

• Data Interface:
  • UART
  • PWM
  • GPIO
• Operating Voltage: 2.8~3.6V
• Operating Current:
  • Peak [Continuous TX]: ~200mA
  • Normal [WiFi ON/OFF, DTIM=100ms]
  • Average. ~12mA, Peak: 200mA
  • Standby [WiFi Shutdown]: <80uA
• Operating Temperature: -40℃- 85℃
• Storage Temperature: -45℃- 125℃
• Dimensions and Size: 22mm×13.5mm×6mm, 1x10 2mm DIP

Software Parameters

• Network Type: STA /AP/STA+AP
• Security Mechanisms: WEP/WPA-PSK/WPA2-PSK
• Encryption: WEP64/WEP128/TKIP/AES
• Update Firmware: Local Wireless, Remote
• Network Protocol: IPv4, TCP/UDP/FTP/HTTP
• User Configuration:
  • AT + instruction set
  • Android/iOS
  • Smart Link APP tools