More info
HF-LPT200 Tiny Wi-Fi Module User Manual
HF-LPT200 Low Power Tiny Wi-Fi Module
The HF-LPT200 is a fully self-contained small form-factor 802.11b/g/n Wi-Fi module, providing a wireless interface to any equipment with a serial/PWM interface for data transfer. The HF-LPT200 integrates MAC, baseband processing, an RF transceiver (including hardware power amplifier), Wi-Fi protocol and network TCP/IP stack in it's embedded firmware.
The HF-LPT200 employs the world's lowest power consumption embedded architecture. It has been optimised for all kinds of client applications in home automation, smart grid, handheld device, personal medical applications and industrial control.
- Support IEEE802.11b/g/n Wireless Standards
- Highly Cost Effective With High-Flying MCU: MC101
- Low-Power Applications with Excellent Power Save Scheme
- Support UART/SPI/PWM/GPIO Data Communication Interface
- Support Work As STA/AP/AP+STA Mode
- Support Smart Link Function (APP provide)
- Support Wireless and Remote Firmware Upgrade Function
- Support WPS Function
- Support Multi-TCP Link (Upto 5) Connection
- Support Internal/External Antenna Option
- Single +3.3V Power Supply
- Smallest Size: 22mm x 13.5mm x3mm, SMT17 Package
Additional Features
Wireless Parameters
- Certification: FCC/CE
- Wireless standard: 802.11 b/g/n
- Frequency range: 2.412GHz-2.484GHz
- Transmit Power:
- 802.11b: +16 (@11Mbps)
- 802.11g: +14 (@54Mbps)
- 802.11n: +13 dBm (@HT20, MCS7)
- Receiver Sensitivity:
- 802.11b: -93 dBm (@11Mbps ,CCK)
- 802.11g: -85dBm (@54Mbps, OFDM)
- 802.11n: -82 dBm (@HT20, MCS7)
- Antenna Option:
- External: Line Pad Output
- Internal: On-board chip antenna
Hardware Parameters
- Data Interface:
- Operating Voltage: 2.8~3.6V
- Operating Current:
- Peak [Continuous TX]: ~200mA
- Normal [WiFi ON/OFF, DTIM=100ms]
- Average. ~12mA, Peak: 200mA
- Operating Temperature: -40℃- 85℃
- Storage Temperature: -45℃- 125℃
- Dimensions and Size: 22mm×13.5mm×3mm, SMT17
Software Parameters
- Network Type: STA/AP/STA+AP
- Security Mechanisms: WEP/WPA-PSK/WPA2-PSK
- Encryption: WEP64/WEP128/TKIP/AES
- Update Firmware: Local Wireless, Remote
- Network Protocol: IPv4, TCP/UDP/FTP/HTTP
- User Configuration:
- AT + instruction set
- Android/iOS
- Smart Link APP tools